Download The Namtai Eyetoy Drivers Zip
Download ---> https://bltlly.com/2tcHJC
Once installed, the Namtai lens will flash and then show an option box to show the pictures on the compact flash card, which is listed as the EyeToy, although you can rename it. Select the option you prefer, like the Compact flash option shown in the screen shot below. Expand the items shown in the picture, then press Save.
When your computer boots you should see the new lens image. If it doesn't show up you can either unplug the eyetoy and replug it, or you can try changing your registry settings. At this point you have a basic Eyetoy out there and will be able to control the camera with the Software Development Kit (SDK). On the next page of this instructable I will cover how to make the camera work with the SDK.
In order for you to install the driver you need to go to the following web page: http://www.namtaidvdr.com/en/namtai-eyetoy.enfan_ntrivnlo.shtml. You should be able to select the namtai driver version from the drop down list. Please note that this driver does not support remote access, you wont be able to use the eyetoy over a network. However you can use the webcam by connecting it directly to a computer via USB-port. d2c66b5586