Optiplex 990 Pci Serial Port Driver Windows 10 NEW!
Click Here ->->->-> https://tinurll.com/2tiGRe
I have OptiPlex 990 purchased at the end of 2012 it originally had Windows 7 64-bit I upgraded to Windows 10 64-bit and I am unable to find a driver for the PCI Serial Port. I have found driver for Windows 7, but I'm unable to find it for Windows 10. When I go into the properties for the serial port it gives this information below.
Yes there's a device for my Anthem Stereo receiver (ARC) Anthem Room Correction that requires a serial port. According to the manual they do not want you to use any type of adapters because it will change the input to the ARC and throw off the balancing of the speakers.
We just received a new Optiplex 990 and due to a configuration issue we had to reinstall the O/S After the install we can't seem to find a driver for the PCI Serial Port (yea we are still using the serial port!). If any one has a link to the specific driver it would be much appreciated.
SUNIX Inc. Multi-I/O Controller Windows(R) Driver.******************************************************************************This driver is built for the Microsoft(R) Windows Operating Systems.Copyright 2010 SUNIX, Inc. All names mentioned herein are a registered trademark or a trademark of SUNIX or its respective owners. All rights reserved.******************************************************************************Driver Version : 7.2.0.0Release Data : 2011/01/07******************************************************************************SUPPORT PLATFORM:Windows 2000 SP4Windows XP 32bit/64bitWindows Vista 32bit/64bitWindows 7 32bit/64bitWindows Server 2003 32bit/64bitWindows Server 2008 32bit/64bitWindows Server 2008 R2 64bit******************************************************************************SUPPORT PRODUCT LIST:SER4027A, SER4027P, SER4027D,SER4037A, SER4037D, SERMSL2010HP, SER4437A, SER4456AM/LM/PM/LL, SER4466RM, SER4337AM,SER4056A, SER4056P, SER4056AM/LM/PM/LL, SER4056HP, SER4056VL/LV, SER4056DW, SER4056JM,SER4000A/AL/P/PL, SER4356AM,SER4066A, SER4066EM, SER4066LL/LV, SER4066WN, SER4066RM, SER8000A, SER8000AL, SER4366AM,SER1600A, SER1640A,PAR4008A, PAR4018A, PAR4418A, PAR4008AT, PAR4018AT, PAR4008LV/LL,MIO4469FX, MIO4079A, MIO4079AT, MIO4479FX, MIO4089A, MIO4089AM, MIO4097A, MIO4096AM,SER4400A/AL/P/PL, SER8400A, SER8400AL,SER5027A, SER5027AL, SER5027H, SER5027HL, SER5027P, SER5027PL, SER5027PH, SER5027PHL,SER5027U, SER5027UL, SER5027UH, SER5027UHL,SER5037A, SER5037AL, SER5037H, SER5037HL, SER5037P, SER5037PH, SER5037PL, SER5037PHL, SER5037U, SER5037UL, SER5037UH, SER5037UHL, SER5037B,SER5056A, SER5056AL, SER5056H, SER5056HL, SER5056P, SER5056PL, SER5056PH, SER5056PHL,SER5056U, SER5056UL, SER5056UH, SER5056UHL, SER5056J, SER5056PZ, SER5056WN, SER5056HP,SER5066A, SER5066AL, SER5066H, SER5066HL, SER5066U, SER5066UL, SER5066UH, SER5066UHL,SER5066LL, SER5066RK, SER5066WN, SER5066J, SER5066JH,SER5337A, SER5356A, SER5366A,SER5427A, SER5427AL,SER5437A, SER5437AL, SER5437H, SER5437HL, SER5437P, SER5437PL, SER5437PH, SER5437PHL,SER5456A, SER5456AL, SER5456H, SER5456HL, SER5456P, SER5456PL, SER5456PH, SER5456PHL,SER5466A, SER5466AL, SER5466H, SER5466HL,PAR5008A, PAR5008AL, PAR5008T, PAR5408A, PAR5408AL,MIO5069A, MIO5069H, MIO5069P, MIO5069HP, MIO5069U, MIO5069UL, MIO5069UH, MIO5069UHL,MIO5069T, MIO5469A, MIO5469H,MIO5079A, MIO5079B, MIO5079H, MIO5079AL, MIO5079HL, MIO5079U, MIO5079UL, MIO5079UH,MIO5079UHL, MIO5079T, MIO5479A, MIO5479H, MIO5479AL, MIO5479HL,MIO5099A, MIO5099H, MIO5499A, MIO5499AL, MIO5499H, MIO5499HL,IPC8139SI, IPC8159SI, IPC8169SI,IPC-P1002, IPC-E1002, IPC-B1002, IPC-P1004, IPC-E1004, IPC-B1004,IPC-P1008, IPC-E1008, IPC-B1008, IPC-P1016,IPC-P2002, IPC-P2002SI, IPC-E2002, IPC-E2002SI, IPC-B2002, IPC-B2002SI,IPC-P2004, IPC-P2004SI, IPC-E2004, IPC-E2004SI, IPC-B2004, IPC-B2004SI,IPC-P2008, IPC-P2008SI, IPC-E2008SI,IPC-P3004, IPC-E3004, IPC-P3008,IPC-E1102, IPC-E2102SI, IPC-E1104, IPC-E2104SI, IPC-P2102, IPC-P2102SI,IPC-P2104, IPC-P2104SI, IPC-P2108, IPC-P2108SI, IPC-E2108, IPC-E2108SI, IPC-P2116,IPC-P3104, IPC-P3104I, IPC-E3104, IPC-E3104I, IPC-P3108, IPC-P3108I, IPC-E3108, IPC-E3108I,CBS1009, CBS2009, CBS4009, CBS1000, CBS2000, CBS4000, CBP1000, CBP0010M, CBP0020M,CBM1925, CBM2925, CBM1010, CBM2010,ECS1400, ECS2400, ECS4400, ECS1000, ECS2000, ECS4000, ECP1000, ECM1010, ECM1020,CDK1037A, CDK1037N, CDK1056A, CDK1056N, CDK1066A, CDK1066N,DIO0601A, DIO0801A, DIO1601A, DIO3201A, DIO0601H, DIO0801H, DIO1601H, DIO3201H,DIO0601P, DIO0801P, DIO1601P, DIO3201P, DIO0601PH, DIO0801PH, DIO1601PH, DIO3201PH,DIO0601AL, DIO0801AL, DIO1601AL, DIO3201AL, DIO0601HL, DIO0801HL, DIO1601HL, DIO3201HL,DIO0601PL, DIO0801PL, DIO1601PL, DIO3201PL, DIO0601PHL, DIO0801PHL, DIO1601PHL, DIO3201PHL,DIO0602A, DIO0802A, DIO1602A, DIO3202A, DIO0602H, DIO0802H, DIO1602H, DIO3202H,DIO0602P, DIO0802P, DIO1602P, DIO3202P, DIO0602PH, DIO0802PH, DIO1602PH, DIO3202PH,DIO0602AL, DIO0802AL, DIO1602AL, DIO3202AL, DIO0602HL, DIO0802HL, DIO1602HL, DIO3202HL,DIO0602PL, DIO0802PL, DIO1602PL, DIO3202PL, DIO0602PHL, DIO0802PHL, DIO1602PHL, DIO3202PHL,DIO0604A, DIO0804A, DIO1604A, DIO3204A, DIO0604H, DIO0804H, DIO1604H, DIO3204H,DIO0604P, DIO0804P, DIO1604P, DIO3204P, DIO0604PH, DIO0804PH, DIO1604PH, DIO3204PH,DIO0604AL, DIO0804AL, DIO1604AL, DIO3204AL, DIO0604HL, DIO0804HL, DIO1604HL, DIO3204HL,DIO0604PL, DIO0804PL, DIO1604PL, DIO3204PL, DIO0604PHL, DIO0804PHL, DIO1604PHL, DIO3204PHL,DIO0608A, DIO0808A, DIO1608A, DIO3208A, DIO0608H, DIO0808H, DIO1608H, DIO3208H,DIO0608P, DIO0808P, DIO1608P, DIO3208P, DIO0608PH, DIO0808PH, DIO1608PH, DIO3208PH,DIO0608AL, DIO0808AL, DIO1608AL, DIO3208AL, DIO0608HL, DIO0808HL, DIO1608HL, DIO3208HL,DIO0608PL, DIO0808PL, DIO1608PL, DIO3208PL, DIO0608PHL, DIO0808PHL, DIO1608PHL, DIO3208PHL,******************************************************************************RELEASE NOTE:Ver 7.2.0.0 - 2010/12/07 0) release version 1) support internal/external GPIO 2) support 3-in-1 (RS-232/422/485) series 3) support more than three parallel ports 4) support SUNIX cash drawer kicker interface card 5) support SUNIX serial library 6) support multi-language UI 7) support silent installation 8) modify layout of control page 9) use driver dll to replace system default dll 10) fix an issue about H/W flow control setting in RS-422/485 11) fix an issue about the delay time of closing port 12) fix an issue about driver crash during change power state 13) fix an issue about buffer overflowVer 7.1.0.0 - 2010/01/13 0) release version 1) solve an issue about re-map series 2) support SUN1999 cardbus series 3) modify layout of control page 4) add reference clock setting in control page 5) add specific IoControl command to return part numberVer 7.0.0.0 - 2009/07/14 0) release version 1) support Golden series, Matrix series, and SUN1999 series******************************************************************************INF FILES: snxpci.inf: SUNIX multi-function card driver INF file snxpcip.inf: SUNIX serial/parallel port driver INF file******************************************************************************INSTALLATION AND REMOVAL INSTRUCTIONS:------------------------------------------------------------------------------Using Driver Installation Package to install SUNIX Multi-I/O Controller DriverNote: It is always best to remove any previously installed Multi-I/O Card Driver from the system before installing a new driver.1. Browse to the driver files location and double click Setup.exe.2. When installing, the driver install dialog box appears. Click on the Next, Continue, or OK prompts to complete the installation when they appear.------------------------------------------------------------------------------Remove SUNIX Multi-I/O Controller Driver from Control Panel1. Open Control Panel, double-click on the Add/Remove Programs (or Programs and Features) icon in it.2. Click on SUNIX Multi-IO Controller, select Remove, and then press Next to uninstall it.3. Reboot the system to uninstall the driver fully.------------------------------------------------------------------------------Using command line to install SUNIX Multi-I/O Controller Driver1. Open Command Processor, find the driver path.2. Run \"Setup.exe\" to install driver.3. When installing, the driver install dialog box appears. Click on the Next, Continue, or OK prompts to complete the installation when they appear.------------------------------------------------------------------------------Remove SUNIX Multi-I/O Controller Driver using command line1. Open Command Processor, find the driver path.2. Run \"Setup.exe /uninst\" to uninstall driver.3. Click on SUNIX Multi-IO Controller, select Remove, and then press Next to uninstall it.4. Reboot the system to uninstall the driver fully.------------------------------------------------------------------------------Using silent installation command to install SUNIX Multi-I/O Controller Driver1. Open Command Processor, find the driver path.2. Run \"Setup.exe /s\" to install driver.3. If need a log file, run \"Setup.exe /s /f2\" i.e. Setup.exe /s /f2C:\\LogDir\\LogFile.log------------------------------------------------------------------------------Remove SUNIX Multi-I/O Controller Driver using silent installation command1. Open Command Processor, find the driver path.2. Run \"Setup.exe /uninst /s /f1\" to uninstall driver. i.e. Setup.exe /uninst /s /f1C:\\SUNIX_driver\\uninst.iss3. If need a log file, run \"Setup.exe /uninst /s /f1 /f2\" i.e. Setup.exe /uninst /s /f1C:\\SUNIX_driver\\uninst.iss /f2C:\\LogDir\\LogFile.log4. Reboot the system to uninstall the driver fully. 153554b96e
https://www.lenalinks.com/forum/fashion-forum/stranded-deep-free-download-mac-2019